Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.espam.edu.ec/handle/42000/617
Tipo de material: bachelorThesis
Título : Curvas guías de operación en el control eficiente del embalse Sixto Durán Ballén para gestionar sustentablemente el patrimonio hídrico
Autor : Cedeño Chávez, José Enrique
Zambrano Loor, Víctor Antonio
Tutor de tesis : Velásquez Intriago, Francisco
Palabras clave : Simulación;Represa;Manejo hídrico;Cuenca hidrográfica.
Fecha de publicación : jun-2017
Editorial : Calceta: ESPAM
Páginas: 77 p.
Resumen : Las curvas guías de operación (volumen/tiempo) de un embalse, ayudan a establecer un orden en el período de llenado y de evacuación. Debido a esto, se tiene como objetivo evaluar la relación entre las curvas guía de operación y el control del embalse Sixto Durán Ballén. Mediante información retrospectiva se obtuvo datos prospectivos utilizando el método Inductivo-Deductivo, se pudo analizar información histórica y simularla en tiempo. Se utilizó los software Global Mapper 16, ArcGIS 10.4.1, AutoCAD 2014, para el tratamiento de los shaphefiles e imágenes satelitales (DEM), y Excel para análisis estadístico de la información histórica. Se obtuvo una extensión de 428,50 km2 de la cuenca aportante del embalse en estudio, en la cual el 4% representa el área de almacenamiento y esta a su vez almacena 228,78 hm3 a la cota 66 m.s.n.m., recolectando anualmente un promedio de 1038,43 hm3 de precipitación, de los cuales 22 hm3 se evaporan y 437 hm3 se evapotranspiran, con lo cual aplicando la fórmula de balance hídrico adicionando las diferentes aportaciones de entrada y salida se realizó un esquema en el programa Stella simulando tres escenarios (seco, lluvioso, promedio), dando curvas guías de operación respectivas para cada escenario. Por lo tanto, las curvas guías de operación que se simulen en un tiempo y espacio estarán estrechamente ligadas al balance hídrico del momento.
Descripción : The operating guide curves (volume/time) of a reservoir, help to establish an order in the filling and evacuation period. Because of this, it aims to evaluate the relationship between operating guide curves and Sixto Durán Ballén reservoir control. Using information retrospective was possible to obtain prospective data using deductive-inductive method, and also was able to analyze historical information and simulate it in time. It was necessary using the following software: Global Mapper 16, ArcGIS 10.4.1, AutoCAD 2014, for the treatment of the shapefiles and satellite imagery (DEM), and Excel for statistical analysis of the historical information. This helped to obtain an extension of 428,50 km2 of the basin contributor of the reservoir in study, in which 4% represents the storage area and this in turn stores 228,78 hm3 to the height 66 m.a.s.l., collecting annually an average of 1038,43 hm3 of precipitation, of which 22 hm3 get evaporated and 437 hm3 is evapotranspirated, so by applying the formula of water balance and adding the different contributions of input and output was realized a schema in the Stella program, simulating three scenarios (dry, rainy, average), giving the appropiate operating guide curves for each scenario. Therefore, the operating guide curves that would simulate in a time and space will be closely associated to the timing of the water balance.
Aparece en las colecciones: Tesis

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TMA135.pdf5,97 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está protegido por copyright original



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons