Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.espam.edu.ec/handle/42000/1312
Tipo de material: bachelorThesis
Título : Prototipo de nodo sensor multi-propósito para cultivos tropicales
Autor : Palma Espinoza, Victor Abelardo
Tutor de tesis : Navia Mendoza, Marlon Rene
Palabras clave : Sensorización ambiental.;Red de nodos;Agricultura de precisión
Fecha de publicación : jul-2020
Editorial : Calceta: ESPAM MFL
Páginas: 42 p.
Resumen : La necesidad de aumentar la producción agrícola con la utilización de menos recursos se ha convertido en una condición prioritaria, para que sea posible es necesario obtener datos específicos ambientales para tomar decisiones en el control de la producción. El presente trabajo de titulación tuvo como fin el desarrollo del prototipo de nodo de sensorización multi-propósito, con enfoque en cultivos tropicales, para ser aplicado dentro de CIIDEA (Ciudad de la Investigación, Innovación y Desarrollo Agropecuario) de la ESPAM MFL (Escuela Superior Politécnica Agropecuaria de Manabí Manuel Félix López). Para el desarrollo del prototipo se utilizó la metodología EDER (Estudio, Diseño, Ejecución y Revisión). En su primera etapa se recopiló información exacta de la organización, además se determinó y se analizó los requerimientos de la institución. En la siguiente etapa se creó el diseño lógico y se ensambló el nodo con base al diseño. Se realizaron pruebas del prototipo en los laboratorios de la Universidad y en el terreno seleccionado en CIIDEA. Por último, en la etapa de revisión se demostró el correcto funcionamiento del prototipo en el campo.
Descripción : The need to increase agricultural production with the use of fewer resources has become a priority condition, so that it is possible to obtain specific environmental data to make decisions in the control of production. The purpose of this titling work was the development of the multi-purpose sensing node prototype, with a focus on tropical crops, to be applied within CIIDEA (Ciudad de la Investigación, Innovación y Desarrollo Agropecuario) of ESPAM MFL (Escuela Superior Politécnica Agropecuaria de Manabí Manuel Félix López). For the development of the prototype the EDER methodology (Estudio, Diseño, Ejecución y Revisión) was used. In its first stage, accurate information about the organization was collected, and the requirements of the institution were determined and analyzed. In the next stage the logical design was created and the node was assembled based on the design. Prototype tests were performed in the laboratories of the University and in the field selected in CIIDEA. Finally, in the review stage the correct functioning of the prototype in the field was demonstrated.
Aparece en las colecciones: Trabajo de Titulación

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TTC04D.pdf1,67 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está protegido por copyright original



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons