Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.espam.edu.ec/handle/42000/19
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorMendoza Cedeño, Leonardo-
dc.contributor.authorSolórzano Angulo, Ana Johana-
dc.date.accessioned2015-06-17T17:17:38Z-
dc.date.available2015-06-17T17:17:38Z-
dc.date.issued2012-04-
dc.identifier.urihttp://repositorio.espam.edu.ec/handle/42000/19-
dc.descriptionThis research was based on the" design and installation of a sprinkle irrigation system at the cocoa crop (Theobroma cacaoL) on the campus of the Espam - MFL", wemade the agronomic design and evaluated daily water needs, intervals and time of irrigation for one year; the irrigation intervals were each day and the time of irrigation varies between 6.42 and 9.51 minutes. the hydraulic design for lateral pipelines and sprinkles need a flow in the origin of the side of 3150 H, the real and length and fictisial length were 85 and 102 m respectively, the inside diameter is 29.6 m, and the commercial diameter of 32 mm. The loss of actual load 2.9 mca, the pressure in the origin of the side of 33.22 mca (PSI). The tertiary pipe requires a flow in the origin of 17850 L, real and fictional calculated length is 75 m and 90 m respectively, the loss of admissible load of 3.22 mca, the inside diameter and the outside or commercial is 58.1 mm and 63 mm, the loss of load is 1.99 mca, and the pressure in the origin of 34.9 mca (49.6 PSI). The costs involved in designing and implementing irrigation system were $1211,029.es_ES
dc.description.abstractEl presente estudio de investigación se basó en el diseño e implementación de un sistema de riego por aspersión para el cultivo de cacao (Theobromacacao L) en el campus de la ESPAM – MFL‖, realizados los cálculos agronómicos, se establecieron las necesidades hídricas diarias, intervalos y tiempo de riego durante 1 año, resultando que los intervalos de riego son cada 1 día, y el tiempo de riego fluctúa entre 6.42 y 9.51 minutos.Una vez hecho los cálculos del diseño hidráulico, para las tuberías laterales o portaspersores, se estableció un caudal en el origen del lateral de 3150 L/h, y la longitud real y ficticia calculada es de 85 m y 102 m respectivamente, el diámetro interior es de 29.6 m, y el comercial de 32 mm. La perdida de carga real de 2.9 mca, la presión en el origen del lateral de 33.22 mca (PSI). Para la tubería terciaria se necesita un caudal en el origen de 17850 L/h, la longitud real y ficticia calculada es de 75 m y 90 m respectivamente, la perdida de carga admisible de 3.22 mca, el diámetro interior y el exterior o comercial es de 58.1 mm y 63 mm, la perdida de carga es de 1.99 mca, y la presión en el origen de 34.9 mca (49.6 PSI). Los costos implicados en diseñar e implementar el sistema de riego fueron de $ 1211,029.es_ES
dc.format.extent99 p.es_ES
dc.language.isospaes_ES
dc.publisherCalceta: ESPAMes_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subjectAspersoreses_ES
dc.subjectExcavaciònes_ES
dc.subject.otherDiseño hidráulicoes_ES
dc.subject.otherFicticiaes_ES
dc.titleDiseño e implementacion de un sistema de riego por aspersión, en cacao (theobroma cacao l) en el campus de la ESPAM-MFLes_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: Tesis

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Solòrzano Angulo, Ana Johana.pdf5,18 MBAdobe PDFVista previa
Visualizar/Abrir


Este ítem está protegido por copyright original



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons